Индекс
|
Имя
|
Спецификация
|
|
Имя индекса
|
Катионная смола
|
Анионная смола
|
|
Полимер
|
Сополимер стирола и ДВБ, гелеобразный
|
|
Функциональная группа
|
-SO3
|
-Н(СН3)3
|
|
Коэффициент конверсии
|
≥99% Н+
|
≥90% ОН-
|
|
Соотношение катионит-анионит V/V
|
1
|
1
|
|
Объем обмена Емкость
|
≥1,75 ммоль/мл
|
≥1,1 ммоль/мл
|
|
Реальная плотность (г/мл)
|
1,17~1,22 г/мл
|
1,06-1,09 г/мл
|
|
Насыпная плотность (г/мл)
|
0,73~0,83 г/мл
|
0,66~0,71 г/мл
|
|
Способность удерживать воду
|
51%~56%
|
53%~58%
|
|
Диапазон размеров частиц
|
0,315~1,25 мм ≥95%
|
0,315~1,25 мм ≥95%
|
|
Общее количество бусин（%)
|
≥95%
|
≥95%
|
|
Коэффициент однородности
|
≤1,6
|
≤1,6
|
Меры предосторожности
Смола должна быть влажная для консервации. Лучшая температура — выше 0℃. Смолу следует поместить в закрытое пространство или добавить в соленую воду 5% или выше, если она не используется в течение длительного времени. Должна быть незамерзающей во время транспортировки. Не ставьте тяжелые предметы на смолу во избежание ее разбивания.
Обычно требует щелочь-вода-кислота-водный путь потока для обработки. Строгое требование требует три циркуляции перед тем, как прийти к окончательному ионному кенел.
Необходимо учитывать различные скорости расширения при трансформации, чтобы выделить достаточно места для предотвращения перелива смолы и обеспечения соответствующей высоты уровня жидкости; Соотношение диаметров колонок должно быть в разумных пределах и избегать тока смещения; Используйте влажную насадочную колонку или обратную промывку для вымывания пузырьков внутри слоя смолы.
Перед подачей жидкости в колонну со смолой необходимо предпринять такие шаги, как флокуляция, фильтрация или фильтрация через песок, чтобы не допустить засорения пор смолы взвешенными твердыми частицами.
Смолу внутри колонны, которая не использовалась в течение длительного времени, следует хранить вне колонны после промывки или добавления соленой воды в солеустойчивую среду, поддерживая при этом уровень жидкости не обезвоживаемым с помощью обычной обратной промывки для разрыхления смолы в случае агломерации.
High-Performance Water Purification with Mixed Bed Resin MX910
In today’s industrial and laboratory environments, the demand for ultra-pure water is higher than ever, requiring advanced solutions that combine efficiency, reliability, and long-term stability. Смешанная смола MX910 offers a proven approach to achieving exceptional water quality by integrating strong acid cation and strong base anion exchange resins in a single unit. This configuration allows for precise removal of residual ions, producing water with extremely low conductivity and minimal total dissolved solids, which is critical for applications ranging from electronics manufacturing to pharmaceutical production.
Supported by Hebei Lijiang Biotechnology Co., Ltd., a leading high-tech manufacturer specializing in mb 151 di resin, tulsion mb 111, purolite resin, purolite mb400, and purolite c100e, MX910 is deployed in both industrial-scale systems and laboratory setups. Lijiang’s advanced materials, combined with extensive technical support, ensure optimal performance, efficient regeneration, and consistent water quality. By leveraging these mixed bed resins, industries can meet stringent operational requirements, reduce downtime, and maintain environmentally responsible water treatment practices, providing a foundation for reliable and high-performance production processes.
Achieving Ultra-Pure Water with Mixed Bed Resin MX910
In modern industrial and laboratory operations, achieving ultra-pure water is a critical requirement for equipment longevity, process efficiency, and product quality. Смешанная смола MX910 has emerged as a leading solution for high-performance deionization, combining strong acid cation and strong base anion exchange resins in a single unit. This configuration enables precise removal of both cations and anions, producing water with extremely low conductivity and total dissolved solids, suitable for high-purity applications such as electronics manufacturing, pharmaceuticals, and power generation.
Hebei Lijiang Biotechnology Co., Ltd. plays a key role in supporting industries that demand ultra-pure water. As a high-tech enterprise specializing in mb 151 di resin, tulsion mb 111, purolite resin, purolite mb400, and purolite c100e, Lijiang integrates research, development, production, sales, and technical service to provide high-quality mixed bed resins and complementary materials. With ISO9001, SGS, and WQA certifications, the company ensures that every product meets stringent international quality and safety standards. The MX910 resin, combined with Lijiang’s expertise, delivers reliable, consistent, and sustainable performance across diverse applications.
Key Performance Features of Mixed Bed Resin MX910 for Industrial Applications
MX910 is designed for optimal efficiency in deionization and mixed bed water treatment systems. Its high exchange capacity ensures rapid removal of residual ions after primary cation and anion exchange, producing ultra-pure water in a single pass. The resin exhibits excellent mechanical stability, minimizing bead attrition and channeling even under continuous industrial operation. Regeneration efficiency is enhanced due to the intimate mixture of strong acid cation and strong base anion resins, allowing for predictable operational cycles and reduced chemical consumption.
In industrial applications, MX910 complements other high-performance resins such as mb 151 di resin, tulsion mb 111, purolite mb400, и purolite c100e. The combination of these resins allows operators to tailor mixed bed systems for specific water quality requirements, optimizing throughput, reducing downtime, and extending resin life. Whether in boiler feedwater treatment, high-pressure steam systems, or semiconductor-grade water production, MX910 consistently delivers superior ion removal, low conductivity, and minimal contamination.
The resin’s mixed bed configuration also simplifies system design and operation. By integrating both cation and anion exchange resins, MX910 eliminates the need for separate polishing stages, reducing equipment footprint and operational complexity. This is particularly beneficial in industrial settings where space and efficiency are critical, such as power plants, chemical manufacturing facilities, and pharmaceutical production lines.
Industrial and Laboratory Applications of Mixed Bed Resin MX910
MX910’s versatility extends across a wide range of industrial and laboratory applications. In electronics and semiconductor manufacturing, it produces water with ultra-low conductivity, essential for preventing contamination during high-precision processes. In the pharmaceutical and biotech industries, the resin ensures compliance with stringent water quality standards, supporting both product safety and regulatory requirements. Additionally, MX910 is widely used in laboratories for analytical procedures requiring highly purified water to avoid interference with sensitive experiments.
In large-scale industrial water systems, MX910 functions as a key component of mixed bed deionization solutions. When used in combination with mb 151 di resin, tulsion mb 111, и purolite resin products such as purolite mb400 и purolite c100e, the system achieves exceptional ion removal efficiency, maintaining stable water quality even under fluctuating feedwater conditions. This capability is vital in processes such as high-pressure boiler feedwater treatment, ultrapure water for cooling circuits, and advanced chemical synthesis operations.
Hebei Lijiang Biotechnology Co., Ltd. further enhances the practical application of MX910 by providing comprehensive technical support, including system design consultation, process optimization, and regeneration guidance. These services ensure that clients maximize the performance of their mixed bed systems, achieve longer resin life, and reduce operating costs. By integrating high-performance resins with professional technical expertise, Lijiang enables industries to implement efficient, reliable, and environmentally responsible water treatment solutions.
Conclusion
Смешанная смола MX910 represents a high-performance, reliable solution for achieving ultra-pure water in both industrial and laboratory settings. Its intimate mixture of strong acid cation and strong base anion resins ensures precise ion removal, efficient regeneration, and consistent high-quality output. In combination with complementary products such as mb 151 di resin, tulsion mb 111, purolite resin, purolite mb400, and purolite c100e, MX910 provides a versatile platform for diverse water treatment applications, from boiler feedwater and high-pressure steam systems to semiconductor-grade and laboratory ultrapure water.
Hebei Lijiang Biotechnology Co., Ltd. underpins the global deployment of MX910 by offering high-performance resin products, comprehensive technical support, and internationally certified quality. By leveraging Lijiang’s expertise and advanced materials, industries worldwide can achieve sustainable, efficient, and high-performing water purification systems. From precise laboratory applications to large-scale industrial operations, MX910 and Lijiang’s portfolio of mixed bed resins provide the foundation for reliable, ultra-pure water production, ensuring operational excellence and long-term performance.
