索引
|
名前
|
仕様
|
|
外観
|
乳白色の不透明な球形のビーズ。
|
|
樹脂の構造
|
PSD
|
|
極性
|
非極性
|
|
水分
|
65%~75%
|
|
粒子サイズ範囲
|
（60〜16メッシュ）0.3〜1.25mm≥95%
|
|
平均孔径
|
9～11 nm
|
|
細孔容積
|
1.50～1.70ml/g
|
|
見かけ密度
|
0.32～0.36g/ml
|
|
骨格密度
|
0.81～0.85g/ml
|
|
実密度（g/ml）
|
1.15～1.19g/ml
|
|
嵩密度（g/ml）
|
0.65～0.70g/ml
|
|
比表面積
|
550～600 m²/g
|
|
吸着能力
|
≥45 mg/g
|
製品の特徴:
- 乳白色または淡黄色のため、処理操作が便利で、着色有機化合物の分離と精製が観察しやすいです。
- 物理的、化学的性質が安定しており、酸、アルカリ、有機溶媒に不溶性であるため、吸着剤、脱着剤の選択に便利です。
- 有機物に対する選択性が優れており、無機塩の存在による影響を受けません。
- 再生は容易です。再生剤は、水、希アルカリ、希酸、または低沸点有機溶媒（メタノール、エタノール、アセトンなど）から選択できます。
- 優れた機械的強度と長い通常耐用年数。
樹脂前処理
工業用樹脂はすべて不活性溶剤を使用しているため、用途に応じて異なる程度の前処理が必要です。抽出器に樹脂層の上10～20cmにエタノールを加え、3～4時間浸漬した後、浸漬液を排出します。抽出工程では、同じ方法で繰り返し洗浄し、出口から浸漬液が出てくるまで繰り返し洗浄し、試験管に濁りがなくなるまで3倍量の水を加えます。その後、きれいな水でエタノールの明らかな臭いがなくなるまで十分にすすいでください。その後、一般用途に使用できます。
強化された再生：
樹脂を一定期間正常に使用し、吸着能力が低下したり、著しく汚染されたりした場合は、再生処理を強化する必要があります。その方法は、樹脂層の10〜20cm上に3〜5％の塩酸溶液を加え、2〜4時間浸漬します。同じ濃度の5〜7倍量の塩酸溶液で洗い流し、出口洗浄液のpH値が中性になるまできれいな水で十分に洗い流した後、上記の方法で5％水酸化ナトリウム溶液に2〜4時間浸漬し、同じ方法で5〜7倍量の水酸化ナトリウム溶液が通過するまで洗い流し、排水のpHが中性になるまで水で十分に洗い流してから、再び使用できます。
予防
- 樹脂には水分が含まれているため、低温時の凍結や高温時のカビの発生を防ぎ、使用に支障をきたすため、保管・輸送中は5～40℃の温度に保たれる必要があります。
- 樹脂は空気に触れたり、何らかの理由で水分を失ったりするため、樹脂が浮いてしまうのを防ぐため、直接水を注入しないでください。エタノールを染み込ませて湿った状態に戻してから、水で洗浄することができます。
- 吸着物質（溶液）はカラムに入れる前に不純物の除去、濾過、清澄化を行い、不純物が樹脂カラムに入るのをできるだけ避け、急性樹脂中毒を引き起こして使用に影響を与えないようにする必要があります。
- 樹脂は中断されます。水で洗浄後、汚染を防ぐため、きれいな水に浸して保管し、定期的に交換してください。また、長期保管の場合は、飽和食塩水またはエタノールに浸すこともできます。
Advanced Purification and Separation with Macroporous Adsorption Resin AD-101
In today’s industrial and laboratory environments, the demand for efficient purification and separation of organic compounds and impurities is higher than ever. Macroporous Adsorption Resin AD-101 provides a high-performance solution for these challenges, offering superior adsorption capacity, rapid mass transfer, and excellent chemical and mechanical stability. Its macroporous structure provides a large surface area, allowing effective removal of pigments, phenolic compounds, and other organic contaminants from a variety of liquids. This makes D101 macroporous resin ideal for applications in food and beverage processing, pharmaceutical production, environmental remediation, and laboratory-scale purification.
Hebei Lijiang Biotechnology Co., Ltd., a leading high-tech enterprise specializing in special resins and advanced adsorption resins, ensures that AD-101 meets stringent international standards and offers consistent performance. Leveraging their expertise as one of the top chromatography resin manufacturers, Lijiang supports integration of AD-101 in systems using various types of chromatography resins, optimizing separation efficiency, reproducibility, and operational reliability. With ISO9001, SGS, and WQA certifications, Lijiang provides technical guidance, system design support, and operational best practices, enabling clients to achieve ultra-pure outputs, enhance process efficiency, and reduce operational costs.
By employing AD-101, industries and laboratories can achieve reliable, high-quality purification and separation results across diverse applications. Its versatility and performance, combined with Lijiang’s technical expertise, establish a strong foundation for efficient, sustainable, and reproducible purification processes, from industrial-scale operations to laboratory research and development.
High-Efficiency Purification with Macroporous Adsorption Resin AD-101
In modern industrial and laboratory processes, achieving high-purity separation and efficient removal of organic compounds is critical for product quality, process reliability, and regulatory compliance. Macroporous Adsorption Resin AD-101 has emerged as a high-performance solution for these applications, providing superior adsorption capacity, rapid mass transfer, and excellent chemical stability. Its macroporous structure ensures a large surface area and high accessibility to solute molecules, making D101 macroporous resin ideal for removing pigments, phenolic compounds, and other organic contaminants from food, pharmaceutical, environmental, and laboratory process streams.
Hebei Lijiang Biotechnology Co., Ltd., a leading high-tech enterprise, produces advanced D101 resin and related resin products while offering comprehensive technical support for industrial and laboratory applications. As a modern manufacturer specializing in high-performance special resins, Lijiang integrates research, development, production, sales, and after-sales service. Their expertise ensures consistent resin quality, compliance with international standards including ISO9001, SGS, and WQA certifications, and the ability to provide solutions tailored to diverse purification and separation needs. By leveraging the unique properties of AD-101, clients can achieve efficient purification, enhanced process reproducibility, and cost-effective operation.
Key Performance Features of AD-101 Macroporous Adsorption Resin for Industrial Applications
AD-101 offers several performance advantages that make it suitable for demanding industrial applications. Its macroporous network enables rapid diffusion of target molecules, high adsorption capacity, and predictable desorption performance. The resin exhibits excellent mechanical strength and chemical resistance, maintaining structural integrity and functional performance in continuous operation and repeated regeneration cycles. These properties are essential for large-scale purification processes such as decolorization, phenol removal, and extraction of active ingredients in food and pharmaceutical production.
In addition to general adsorption, AD-101 resin plays a significant role in chromatography applications. When used alongside other types of chromatography resins, AD-101 provides flexibility and high separation efficiency for both preparative and analytical processes. Its structural stability, high surface area, and uniform pore distribution make it suitable for applications such as column chromatography, batch adsorption, and bioseparation. By integrating AD-101 into D101 macroporous resin-based systems, operators can achieve enhanced resolution, efficient solute recovery, and reproducible performance, which are critical for industrial and research laboratories alike.
The versatility of AD-101 is further enhanced by its compatibility with other high-performance resins, allowing customized system designs that meet specific operational requirements. In applications where ultra-pure water or selective compound separation is needed, AD-101 can be deployed alongside 混合床樹脂 または deionization resin systems, providing comprehensive solutions for complex separation challenges.
Industrial and Laboratory Applications of Macroporous Adsorption Resin AD-101
AD-101 resin is widely applied across diverse industries. In the food and beverage sector, it is used for decolorization, removal of phenolic compounds, and purification of natural extracts and sweeteners. In pharmaceuticals, AD-101 ensures the separation of active pharmaceutical ingredients from impurities, supporting product safety, regulatory compliance, and consistent batch quality. Environmental applications include the removal of organic pollutants from wastewater or process effluents, contributing to sustainability goals and regulatory adherence.
In laboratory settings, AD-101 provides reliable performance for both analytical and preparative chromatography. Researchers frequently pair AD-101 with other types of chromatography resins for protein purification, separation of bioactive compounds, or high-precision fractionation of chemical mixtures. Its use in column chromatography allows for controlled adsorption and desorption cycles, efficient solute recovery, and reproducible results across repeated experiments. Compatibility with a variety of solvents and pH conditions further enhances its utility in research and pilot-scale operations.
Hebei Lijiang Biotechnology Co., Ltd. ensures that AD-101 resin users have access to technical guidance, system design support, and operational best practices. Their expertise enables clients to implement D101 macroporous resin efficiently in industrial water treatment, food and pharmaceutical purification, and laboratory chromatography systems. By combining high-performance resin products with professional support, Lijiang helps industries maximize process efficiency, extend resin life, and maintain consistent quality standards.
Conclusion
Macroporous Adsorption Resin AD-101 is a versatile and high-performance solution for purification and separation in industrial and laboratory environments. Its macroporous structure, high surface area, and chemical stability allow for efficient adsorption, rapid mass transfer, and reproducible desorption, making it ideal for a wide range of applications. When combined with other types of chromatography resins, AD-101 enhances separation efficiency, resolution, and solute recovery, supporting both preparative and analytical processes.
Hebei Lijiang Biotechnology Co., Ltd., a leading manufacturer of D101 resin and other advanced resins, provides high-quality products, technical support, and system integration guidance to ensure optimal resin performance. By leveraging Lijiang’s expertise and AD-101’s capabilities, industries worldwide can achieve efficient, reliable, and cost-effective purification and separation processes. From food and pharmaceutical production to environmental treatment and laboratory-scale chromatography, AD-101 provides the foundation for high-quality, reproducible, and sustainable operations.
