색인
|
이름
|
사양
|
|
모습
|
우유빛이 도는 흰색의 불투명한 구형 구슬입니다.
|
|
수지의 구조
|
PSD
|
|
극성
|
비극성
|
|
수분
|
65%~75%
|
|
입자 크기 범위
|
(60~16메쉬)0.3~1.25mm≥95%
|
|
평균 기공 크기
|
9-11해리
|
|
기공 부피
|
1.50-1.70ml/g
|
|
겉보기 밀도
|
0.32-0.36g/ml
|
|
골격 밀도
|
0.81-0.85g/ml
|
|
실제 밀도(g/ml)
|
1.15-1.19g/ml
|
|
체적 밀도(g/ml)
|
0.65-0.70g/ml
|
|
비표면적
|
550~600m²/g
|
|
흡착 용량
|
≥45mg/g
|
제품 특징:
- 유백색 또는 연한 노란색은 처리 작업에 편리함을 제공하며, 유색 유기화합물의 분리 및 정제가 관찰하기 쉽습니다.
- 물리적, 화학적 성질이 안정적이며, 어떠한 산, 알칼리, 유기용매에도 녹지 않아 흡착제와 탈착제 선정에 편리합니다.
- 유기물에 대한 선택성이 좋으며 무기염의 존재에 영향을 받지 않습니다.
- 재생이 용이합니다. 재생제는 물, 묽은 알칼리, 묽은 산 또는 저비점 유기 용매(예: 메탄올, 에탄올, 아세톤 등) 중에서 선택할 수 있습니다.
- 우수한 기계적 강도와 긴 일반 사용 수명.
수지 전처리
산업용 수지는 모두 불활성 용매를 포함하고 있으므로 용도에 따라 전처리 단계를 다르게 해야 합니다. 추출기에서 수지층 위로 10~20cm 깊이로 에탄올을 넣어 3~4시간 동안 침지시킨 후 침지액을 배출합니다. 추출 과정의 경우, 같은 방법으로 침지액이 배출구에 닿을 때까지 반복 세척합니다. 시험관에 침지액의 3배 분량의 물을 넣어 탁해지지 않을 때까지 세척합니다. 깨끗한 물로 에탄올 냄새가 나지 않을 때까지 충분히 헹군 후, 일반 용도로 사용할 수 있습니다.
향상된 재생:
수지를 일정 기간 정상적으로 사용하면 흡착 용량이 감소하거나 심하게 오염된 경우 재생 처리를 강화해야 합니다. 방법은 수지층 위 10~20cm에 3~5% 염산 용액을 첨가하고 2~4시간 동안 담가 두는 것입니다. 염산 용액의 5~7배 용량의 동일한 농도로 헹군 다음, 유출 세척 용액의 pH 값이 중성이 될 때까지 깨끗한 물로 충분히 헹군 다음, 위의 방법에 따라 5% 수산화나트륨 용액에 2~4시간 동안 담가 두었다가 같은 방법으로 수산화나트륨 용액의 5~7배 용량이 통과할 때까지 헹군 다음, 유출수의 pH가 중성이 될 때까지 물로 충분히 헹군 다음, 다시 사용할 수 있습니다.
지침
- 수지에는 수분이 포함되어 있으므로 보관 및 운송 중에는 5~40ºC의 온도를 유지해야 합니다. 이는 저온에서는 동결되고 고온에서는 곰팡이가 생기기 때문에 사용에 영향을 미칩니다.
- 레진은 공기에 노출되거나 어떤 이유로든 수분을 잃게 되므로, 레진이 뜨는 것을 방지하기 위해 직접 물을 주입하지 마십시오. 에탄올을 함침시켜 젖은 상태로 복원한 후 물로 세척할 수 있습니다.
- 흡착물질(용액)은 컬럼에 넣기 전에 불순물 제거, 여과, 정화 과정을 거쳐야 하며, 불순물이 수지 컬럼에 들어가는 것을 최대한 방지해야 급성 수지 중독을 일으키지 않고 사용에 영향을 미치지 않습니다.
- 수지가 손상될 수 있습니다. 물로 세척한 후에는 깨끗한 물에 담가 보관하고 오염을 방지하기 위해 정기적으로 교체해야 합니다. 장기간 보관하려면 포화 식염수나 에탄올에 담가둘 수도 있습니다.
Advanced Purification and Separation with Macroporous Adsorption Resin AD-101
In today’s industrial and laboratory environments, the demand for efficient purification and separation of organic compounds and impurities is higher than ever. Macroporous Adsorption Resin AD-101 provides a high-performance solution for these challenges, offering superior adsorption capacity, rapid mass transfer, and excellent chemical and mechanical stability. Its macroporous structure provides a large surface area, allowing effective removal of pigments, phenolic compounds, and other organic contaminants from a variety of liquids. This makes D101 macroporous resin ideal for applications in food and beverage processing, pharmaceutical production, environmental remediation, and laboratory-scale purification.
Hebei Lijiang Biotechnology Co., Ltd., a leading high-tech enterprise specializing in special resins and advanced adsorption resins, ensures that AD-101 meets stringent international standards and offers consistent performance. Leveraging their expertise as one of the top chromatography resin manufacturers, Lijiang supports integration of AD-101 in systems using various types of chromatography resins, optimizing separation efficiency, reproducibility, and operational reliability. With ISO9001, SGS, and WQA certifications, Lijiang provides technical guidance, system design support, and operational best practices, enabling clients to achieve ultra-pure outputs, enhance process efficiency, and reduce operational costs.
By employing AD-101, industries and laboratories can achieve reliable, high-quality purification and separation results across diverse applications. Its versatility and performance, combined with Lijiang’s technical expertise, establish a strong foundation for efficient, sustainable, and reproducible purification processes, from industrial-scale operations to laboratory research and development.
High-Efficiency Purification with Macroporous Adsorption Resin AD-101
In modern industrial and laboratory processes, achieving high-purity separation and efficient removal of organic compounds is critical for product quality, process reliability, and regulatory compliance. Macroporous Adsorption Resin AD-101 has emerged as a high-performance solution for these applications, providing superior adsorption capacity, rapid mass transfer, and excellent chemical stability. Its macroporous structure ensures a large surface area and high accessibility to solute molecules, making D101 macroporous resin ideal for removing pigments, phenolic compounds, and other organic contaminants from food, pharmaceutical, environmental, and laboratory process streams.
Hebei Lijiang Biotechnology Co., Ltd., a leading high-tech enterprise, produces advanced D101 resin and related resin products while offering comprehensive technical support for industrial and laboratory applications. As a modern manufacturer specializing in high-performance special resins, Lijiang integrates research, development, production, sales, and after-sales service. Their expertise ensures consistent resin quality, compliance with international standards including ISO9001, SGS, and WQA certifications, and the ability to provide solutions tailored to diverse purification and separation needs. By leveraging the unique properties of AD-101, clients can achieve efficient purification, enhanced process reproducibility, and cost-effective operation.
Key Performance Features of AD-101 Macroporous Adsorption Resin for Industrial Applications
AD-101 offers several performance advantages that make it suitable for demanding industrial applications. Its macroporous network enables rapid diffusion of target molecules, high adsorption capacity, and predictable desorption performance. The resin exhibits excellent mechanical strength and chemical resistance, maintaining structural integrity and functional performance in continuous operation and repeated regeneration cycles. These properties are essential for large-scale purification processes such as decolorization, phenol removal, and extraction of active ingredients in food and pharmaceutical production.
In addition to general adsorption, AD-101 resin plays a significant role in chromatography applications. When used alongside other types of chromatography resins, AD-101 provides flexibility and high separation efficiency for both preparative and analytical processes. Its structural stability, high surface area, and uniform pore distribution make it suitable for applications such as column chromatography, batch adsorption, and bioseparation. By integrating AD-101 into D101 macroporous resin-based systems, operators can achieve enhanced resolution, efficient solute recovery, and reproducible performance, which are critical for industrial and research laboratories alike.
The versatility of AD-101 is further enhanced by its compatibility with other high-performance resins, allowing customized system designs that meet specific operational requirements. In applications where ultra-pure water or selective compound separation is needed, AD-101 can be deployed alongside 혼합층 수지 또는 deionization resin systems, providing comprehensive solutions for complex separation challenges.
Industrial and Laboratory Applications of Macroporous Adsorption Resin AD-101
AD-101 resin is widely applied across diverse industries. In the food and beverage sector, it is used for decolorization, removal of phenolic compounds, and purification of natural extracts and sweeteners. In pharmaceuticals, AD-101 ensures the separation of active pharmaceutical ingredients from impurities, supporting product safety, regulatory compliance, and consistent batch quality. Environmental applications include the removal of organic pollutants from wastewater or process effluents, contributing to sustainability goals and regulatory adherence.
In laboratory settings, AD-101 provides reliable performance for both analytical and preparative chromatography. Researchers frequently pair AD-101 with other types of chromatography resins for protein purification, separation of bioactive compounds, or high-precision fractionation of chemical mixtures. Its use in column chromatography allows for controlled adsorption and desorption cycles, efficient solute recovery, and reproducible results across repeated experiments. Compatibility with a variety of solvents and pH conditions further enhances its utility in research and pilot-scale operations.
Hebei Lijiang Biotechnology Co., Ltd. ensures that AD-101 resin users have access to technical guidance, system design support, and operational best practices. Their expertise enables clients to implement D101 macroporous resin efficiently in industrial water treatment, food and pharmaceutical purification, and laboratory chromatography systems. By combining high-performance resin products with professional support, Lijiang helps industries maximize process efficiency, extend resin life, and maintain consistent quality standards.
Conclusion
Macroporous Adsorption Resin AD-101 is a versatile and high-performance solution for purification and separation in industrial and laboratory environments. Its macroporous structure, high surface area, and chemical stability allow for efficient adsorption, rapid mass transfer, and reproducible desorption, making it ideal for a wide range of applications. When combined with other types of chromatography resins, AD-101 enhances separation efficiency, resolution, and solute recovery, supporting both preparative and analytical processes.
Hebei Lijiang Biotechnology Co., Ltd., a leading manufacturer of D101 resin and other advanced resins, provides high-quality products, technical support, and system integration guidance to ensure optimal resin performance. By leveraging Lijiang’s expertise and AD-101’s capabilities, industries worldwide can achieve efficient, reliable, and cost-effective purification and separation processes. From food and pharmaceutical production to environmental treatment and laboratory-scale chromatography, AD-101 provides the foundation for high-quality, reproducible, and sustainable operations.
